Bespoke Victorian Etched


	Bespoke Victorian

Our bespoke service allows us to copy any Victorian design and reproduce it using our own techniques. We also copy modern designs.

On this page we have displayed some of the one off designs we have reproduced for private customers and other glass and glazing merchants.

Some of the Victorian etched glass we have reproduced has fired enamel colours inlaid; these types of Victorian etched glass are very rare.

There are lots of Victorian etched glass designs which we have copied and reproduced over the years.

We have made the most popular Victorian etched glass designs a standard product in our catalogue, this allows us to offer them to our customers at a very good competitive price.

If your interested in pricing for a one off etched glass design please forward a picture and approx measurements by e-mail sales.artglass@tiscali.co.uk


	Repeat Etched Enamel Clover Design Copied & Reproduced For A Private Customer In Roundhay Leeds.


		Repeat Etched Glass Design Copied & Reproduced For Linley Stained Glass Design, Chester.


	Repeat Etched Daisy Design Copied & Reproduced For A Private Customer.


	Etched Enameled Glass Copied & Reproduced For Authentic Stained Glass Scotland.




		Close Up

Etched Enamel Door Panel Coppied And Reproduced For Pearsons Glass Ltd, Merseyside.

The pictures of the door panel below were copied and reproduced from one broken piece of the original. The border design was very intricate and quite hard to copy and lay out. The coloured border was fired in the kiln, then the design was etched out of the glass. This design was very unusual and also very effective, as the coloured border looked fantastic with the etched glass.




	Original Broken Piece




		New Panel Being Polished Up Ready For Fitting




	New Panel In Situe

Etched Enamel Door Panel And Sidelights Copied And Reproduced For A Private Customer In Scotland Through Solaglas Windowcare.

The picture of the door panel and sidelight were copied and reproduced for a private customer in Scotland, through Solaglas, Windowcare.




		Glass Being Masked Off Ready For Sandblasting.


		Close Up Of The Centre




	Finished Door Panel.

The panels had been copied by a company previously to ourselves, but the colours were all incorrect! These panels were a very unusual design to copy, as there were several different colours to apply to fire in the kiln as well as etching parts of the design.

			Finished Side Panel.

Stained Glass Dome (Ireland)

The stained glass came from an abbey in Belfast, Ireland (Mount Melleray - Portlegon House - Our Lady Of Bethlehem Abbey).

The work consisted of the replacing one segment of a six segment dome which had been broken. Each piece was approximately 1700mm X 1220 mm (67 inch X 48 Inch). The overall size of the dome was 3.5 MT wide X 3 MT high

The work we carried out was to copy and reproduce the etched fired enamel design from the original segment, we then applied the design to a piece of 7mm Roughcast, we then applied a resist to the glass, the glass was then sandblasted, Then with the help of a company who specializes in glass bending the glass was both bent and fired in a kiln at the same time. Bent glass is not unusual to this size but glass staining is.


	The photographs below display the processes we went through to recreate the dome segment:




		The original broken segment.



		The segment ready to be fired.




	Masking off the glass ready for sandblasting.



		The segment after it had been be fired and bent at melting point in the kiln.


	Finish Segment Fired, Etched & Bent Ready To Ship Back To Ireland

For More Details Please Contact Us

e-mail: sales.artglass@tiscali.co.uk

Tel/Fax: 0151 489 2214